Reset Search
 

 

Article

S-Series module reset with Fuji HST UNDERFLOW or PARITY error message in logs

« Go Back

Information

 
TitleS-Series module reset with Fuji HST UNDERFLOW or PARITY error message in logs
Symptoms
S-Series module reset with the below Fuji HST UNDERFLOW or PARITY error message in logs:
 
============================================================================== 
Message 6/72 Syslog Message 08.31.01.0006 03/16/2016 02:26:29 
<0>Fuji[2.tNimIntr]Switch Chip 11 (Slot 2 Mainboard) detected fatal cond 
ition. ( 0x00e95ab4 0x017e0090 0x017d99a4 0x004423dc 0x004723f4 0x01ae40 
e4 0xeeeeeeee ) 
============================================================================== 
Message 7/72 Syslog Message 08.31.01.0006 03/16/2016 02:26:29 
<3>Fuji[2.tNimIntr]Fuji HST UNDERFLOW 2 intr: Fuji=11, Adr=14, Reg=0x001 
00000 
==============================================================================
 
Message   5/169  Syslog Message            08.32.01.0022   07/30/2016 14:49:02
    <0>Fuji[7.tNimIntr]Switch Chip 1 (Slot 7 Mainboard) detected fatal condi
    tion. ( 0x00e8a334 0x017ed66c 0x017e6fbc 0x00443044 0x00470d3c 0x0047233
    0 0x01af23e4 0xeeeeeeee )
==============================================================================
Message   6/169  Syslog Message            08.32.01.0022   07/30/2016 14:49:02
    <3>Fuji[7.tNimIntr]Fuji HST PARITY 1 intr: Fuji=1, Adr=20, Reg=0x00000100


 
Environment
  • S-Series
  • 8.x
Cause
Faulty Hardware.
Resolution
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255