Reset Search



STP Topology Changes are generated even though only the edge port is flapped

« Go Back


TitleSTP Topology Changes are generated even though only the edge port is flapped
The STP port link-type configuration is not retained when a untagged port is deleted from a VLAN which is part of STP domain and then added in another VLAN which is also part of the STP domain resulting in the port behaving like a normal STP port even though the configuration is displayed in <show configuration stpd>. Like in a following example:

* X450G2-24p-G4.9 # show configuration stp
# Module stp configuration.
configure stpd s0 mode dot1w
enable stpd s0 auto-bind vlan v10
configure stpd s0 ports link-type edge 24
configure stpd s0 ports edge-safeguard enable 24
configure stpd s0 ports bpdu-restrict enable 24
enable stpd s0

* X450G2-24p-G4.10 # show stp s0 port 24 detail
Stpd: s0   Port: 24   PortId: 8018    Stp: ENABLED    Path Cost: 20000
Port Mode         : 802.1D      Port Role          : Designated
Port State        : FORWARDING       Topology Change Ack: FALSE
Port Priority     : 128
Designated Root   : 80:00:00:04:96:99:99:dd     Designated Cost: 0
Designated Bridge : 80:00:00:04:96:99:99:dd     Designated Port Id: 8018
Partner STP version     : Dot1w
Restricted Role         : Disabled
Active Role             : Disabled
Edge Port Safe Guard    : Enabled
Bpdu Restrict           : Enabled
Restricted TCN          : Off
Loop Protect            : Off
Loop Protect Partner    : Incapable
Operational Edge        : FALSE
Auto Edge               : On
Participating Vlans: v10
  • STP 
  • EXOS and higher
This is a software bug.
CR xos0070993 ​has been created to track it. Its currently earmarked to be resolved in EXOS 22.5.1.
Additional notes



Was this article helpful?



Please tell us how we can make this article more useful.

Characters Remaining: 255