Reset Search
 

 

Article

"show port inlinepower" command display PoE status "Disabled"

« Go Back

Information

 
Title"show port inlinepower" command display PoE status "Disabled"
Symptoms
"show port inlinepower" command display PoE status "Disabled"
Environment
  • SecureStack
  • EOS
  • All Firmware Versions
Cause
POE is disabled by configuration or hardware failure.
Resolution
  • Verify configuration by issuing the 'show config inlinepower' command. You should see the following:
set port inlinepower <port_string> admin off
  • If you do not see the above command try cycling the POE mode manually:
set port inlinepower <port_string> admin off
       then
set port inlinepower <port_string> admin auto
  • If the ports still show POE status as "Disabled", contact GTAC here
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255