Symptoms | - Switch fails to boot
- SecureStack switch constantly reboots in a loop condition
- VT100 Terminal session prints messages similar to the following:
-
Enterasys A4-Series Boot Code...
SDRAM Circuit Test of 255MB
1%2%3%4%5%6%7%8%9%10%11%12%13%14%15%16%17%18%19%20%21%22%23%24%25%26%27%28%29%30%31%32%33%34%35%36%37%38%39%40%41%42%43%44%45%46%47%48%49%50%51%52%53%54%55%56%57%58%59%60%61%62%63%64%65%66%67%68%69%70%71%72%73%74%75%76%77%78%79%80%81%82%83%84%85%86%87%88%89%90%91%92%93%94%95%96%97%98%99%100%
Version 01.00.51 10-20-2011
Computing MD5 Checksum of operational code...
Select an option. If no selection in 2 seconds then
operational code will start.
1 - Start operational code.
2 - Start Boot Menu.
Select (1, 2):
Operational Code Date: Thu Jun 9 08:52:58 2016
Uncompressing.....
50% 100%
||||||||||||||||||||||||||||||||||||||||||||||||||
Adding 73014 symbols for standalone.
WatchdogTask - Active
Inst Memory Protection - Active
Instantiating /ramDrv:0 as rawFs, device = 0x30001
Instantiating /snpDrv:0 as rawFs, device = 0x40001
Last switch reset caused by Fault(0x00000100) SRR0(0x012B6D54) SRR1(0x0000B002) DMISS(0x10016F2C) IMISS(0x00000000) DAR(0x00000000) DSISR(0x00000000), after 1 seconds
|
|
---|