Can't find what you need?


• Ask the Community
• Create a Case
Reset Search
 

 

Article

Setting the reference firmware for bonded S and K series switches

« Go Back

Information

 
TitleSetting the reference firmware for bonded S and K series switches
Symptoms
When setting the reference image for S and K series firmware the bonded chassis options are not available.
Environment
  • K-Series
  • S-Series
  • OneView
  • Extreme Management
Cause
The header portion of the firmware does not included the bonded chassis part numbers.
Resolution
1.  Open Extreme Management Center.
2.  Change to the Network > Firmware tab. 
3.  Drill down to the firmware in question. 
4.  Right click the firmware and select Assign Firmware 
5.  Select the Bonded device for this to get added. 
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255