Reset Search
 

 

Article

Switch fails post displaying an "address failed" error message for the RAM test

« Go Back

Information

 
TitleSwitch fails post displaying an "address failed" error message for the RAM test
Symptoms
  • Switch will not boot, displays "address failed" error message from the RAM test. 
"Default BootLoader Image 
DRAM Post 
RAM_TEST_Step1: R0W1: address failed"
Environment
  • Summit X440
Cause
Possible hardware failure.
Resolution
Contact GTAC for assistance.
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255