Reset Search
 

 

Article

Trap receiver configuration is not saved in EXOS when configured from Netsight

« Go Back

Information

 
TitleTrap receiver configuration is not saved in EXOS when configured from Netsight
Symptoms
Trap receiver configuration is not saved in EXOS when configured from Netsight
Environment
EXOS 21.1.3
Cause
1. Configure trap receiver from Netsight.
2. Check the configured trap receiver using "show management" command.
3. Execute "show configuration snmp" and check that there is no trap receiver configuration.
4. Now reboot(with/without save) and check "show management" --->configured trap receiver lost because it didn't saved in EXOS.
Resolution
This will be fixed in CR#xos0068767
Target Release(s):    
EXOS 22.3.1 (Assigned)
EXOS 21.1.4 (Assigned)
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255