Reset Search
 

 

Article

Unable to telnet or ssh via cli

« Go Back

Information

 
TitleUnable to telnet or ssh via cli
Symptoms
Error: Maximum number of shell sessions has been reached!
Environment
  • EXOS ALL
Cause
  1. All CLI sessions are being used
  2. Idle sessions connected to the switch
  3. Maximum cli session limit reached
Resolution
1. Look for Idle or unwanted sessions with the below command.
show session


2. Clear idle session if any idle session found
clear session <session_Id>

3. Increase cli session
configure cli max-sessions <num-of-sessions>
Note :Maximum of 16 sessions can be configured
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255