Reset Search
 

 

Article

Update to Firmware 8.42.xx fails with constant reboots

« Go Back

Information

 
TitleUpdate to Firmware 8.42.xx fails with constant reboots
Symptoms
  • After upgrade the system continuously reboots with the following messages:
Message 51/259 Syslog Message 08.42.01.0008 05/07/2016 10:53:49
<1>DistServ[12.tDSserv5]moveToSyncR.5(Host) client 5(Host) not ready in 18062 ( 0x00ec9b48 0x00728db8 0x007332f8 0x00733d18 0x01b4c624 0xeeeeeee )
Message 48/282 Syslog Message 08.42.01.0008 05/07/2016 11:08:13
<1>DistServ[4.tDsBrdOk]serverWatchDog.5(Host) client 95(DCL) not ready in 19585 ( 0x00ec9b48 0x00731594 0x007266f8 0x01b4c624 0xeeeeeeeee )
Environment
  • S-Series
  • Upgrading to 8.42.xx firmware 
  • OSPF 
Cause
Under investigation but possibly related to high number of the ospf network commands and for some reason in 8.42 it is taking longer to complete them eventually causing the watchdog to trip and reset.
Resolution
Under investigation. Please open a case with GTAC if you experience this 
How to contact Extreme Networks Global Technical Assistance Center (GTAC)


 




 
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255