Reset Search
 

 

Article

VX9000 not adopting any AP

« Go Back

Information

 
TitleVX9000 not adopting any AP
Symptoms
The APs are not able to be adopted by the controller, even though they are visible over layer 2 or layer 3. If you check the GUI status for offline devices, you see the following:

User-added image

 
Environment
  • ExtremeWiNG VX9000 Controllers
  • WirelessWiNG VX9000 Controllers
  • ExtremeWiNG Access Points
  • WirelessWiNG Acess Points
  • WiNG v5.X Software
Cause
The appliance license is not activated or applied into the appliance, or it is done incorrectly.
Resolution
Activate the appliance license on the controller, by doing the following:
> en
# self
# (config-device-AA-AA-AA-AA-AA-AA)# license VX configurationkey
# com wr

 
Additional notes
In case you have a checksum error, after applying the license, when committing and writing, this article should help Why VX9000 licenses are no longer valid after changing management IP address?

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255