Reset Search
 

 

Article

X460G2 not showing EDP information when mirroring is disabled

« Go Back

Information

 
TitleX460G2 not showing EDP information when mirroring is disabled
Symptoms
  • With either remote mirroring disabled or after un-configuring a monitor port of remote mirroring, the EDP neighbors are not displayed
Environment
  • X460G2
  • 15.6.4.2patch1-6

 
Cause
  • Once remote mirroring is enabled, the mirrored port and loopback port will be added to internal mirroring vlan for its operation. However after “disable mirroring”, the mirrored port is not removed from that internal vlan.
  • This is causing issues while processing further EDP packets received on that port. CPU is rejecting EDP packets with reason that packets received on non-existent vlan.
Resolution

Workaround:- Reboot the switch or re-configure mirroring.​

  • For more information on scoped fix EXOS version, use the CR# xos0064956 for tracking.

Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255