Example of authentication password: A2@cT*7bU#8mP!4b
Example of privacy password: P5n/8Zv:4EX2+q7G
If the switch is discovered and provisioned by ZTP+ then the configuration of the SNMP user is not handled properly.
The CLI command to create proper SNMP profile should be:
configure snmpv3 add user "test_user" authentication sha "A2@cT*7bU#8mP!4b" privacy aes "P5n/8Zv:4EX2+q7G"
Each password must be encapsulated in quotes. Without quotes the privacy part is ignored and the authentication part is truncated.