Reset Search
 

 

Article

Coverage-hole-detection requires that radio-resource-measurement also be enabled

« Go Back

Information

 
TitleCoverage-hole-detection requires that radio-resource-measurement also be enabled
Symptoms
CLI Output

% Error: Commit failed for the following reason:

[wlan 'block-mac'] enabling coverage-hole-detection requires that radio-resource-measurement also be enabled

Please fix the problem and Commit again, otherwise Revert or continue making changes
rfs7000-17E1D4(config-wlan-block-mac)#

GUI output:
Coverage-hole-detection commit error
Environment
WiNG 5.X

 
Cause
Radio-resource-measurement is not enabled prior enabling the coverage-hole-detection
Resolution
Enable the Radio-resource-measurement 

CLI:
rfs7000-17E1D4(config-wlan-block-mac)#radio-resource-measurement 
rfs7000-17E1D4(config-wlan-block-mac)#show context 
wlan block-mac
 ssid block-mac
 vlan 10
 bridging-mode local
 encryption-type none
 authentication-type none
 wireless-client hold-time 86400
 wireless-client inactivity-timeout 86400
 radio-resource-measurement
 wing-extensions coverage-hole-detection
rfs7000-17E1D4(config-wlan-block-mac)#commit write 
[OK]



GUI:
Check the radio-resource-management box
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255