Reset Search
 

 

Article

Unable to push VLAN's via port templates from XMC to VPEX Extended ports

« Go Back

Information

 
TitleUnable to push VLAN's via port templates from XMC to VPEX Extended ports
Symptoms
Try to push a port template or select <Use Local Settings> and add tagged ports manually and also untagged port
Although you may see a Enforce Success, the VLAN’s will not be pushed to the switches properly.

The normal switches ports will be configured as intended but not the VPEX ports which starts with 100:*, 101:* ……

Some times the Enforce was clearing the switch configuration on random times but not replicable all the time. 



 
Environment
  • EXOS
  • ONIE
  • VPEX
  • Extreme Management Center
  • 8.4 and lower versions 
Cause
This is a software issue in Extreme Management Center
Resolution
Upgrade to 8.4 once it is General available.
Reference change request number net0058511

After upgrade the VLAN is getting copied to the switch extended ports without an issue.
XMC enforce does not clears the switch config after 8.4 upgrade 

 
Additional notes
In 8.4 The switch configuration is not getting cleared.

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255