Reset Search
 

 

Article

no snmp trap link-status does not show up in running config

« Go Back

Information

 
Titleno snmp trap link-status does not show up in running config
Symptoms
When running "no snmp trap link-status" under an interface, the command is accepted and appears to work, but it does not show up in the running config.

NOS v6.x output

VDX6740T-1(conf-if-te-1/0/2)# no snmp trap link-status
VDX6740T-1(conf-if-te-1/0/2)# end
VDX6740T-1#
VDX6740T-1# show run int te 1/0/2
interface TenGigabitEthernet 1/0/2
no fabric isl enable
no fabric trunk enable
shutdown

NOS v7.x output

sw0(conf-if-te-2/0/4)# do sh run interface TenGigabitEthernet 2/0/1
interface TenGigabitEthernet 2/0/1
no snmp trap link-status <//------------------ missing in NOS v6.x
fabric isl enable
fabric trunk enable
shutdown
Environment
Software Release: N/A
Fixed in Version: N/A
Cause
This is only a cosmetic issue. Below lists the expected results for each current NOS release.

NOS 4.x: We don't support "no snmp trap link-status".

NOS 5.0.2x: Introduce the CLI [no snmp trap link-status] and it is working as below:

sw0(conf-if-te-165/0/21)# do sh run int ten 165/0/21
interface TenGigabitEthernet 165/0/21
no snmp trap link-status
fabric isl enable


NOS 6.x: Issue is seen. This will fixed in NOS 6.0.2b

NOS 7.x: Already fixed.
Resolution
This is only a cosmetic issue. Below lists the expected results for each current NOS release.

NOS 4.x: We don't support "no snmp trap link-status".

NOS 5.0.2x: Introduce the CLI [no snmp trap link-status] and it is working as below:

sw0(conf-if-te-165/0/21)# do sh run int ten 165/0/21
interface TenGigabitEthernet 165/0/21
no snmp trap link-status
fabric isl enable


NOS 6.x: Issue is seen. This will fixed in NOS 6.0.2b

NOS 7.x: Already fixed.
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255