Reset Search
 

 

Article

show access-list ip output is missing after removing ACL from a management interface in cluster

« Go Back

Information

 
Titleshow access-list ip output is missing after removing ACL from a management interface in cluster
Symptoms
show access-list ip output is missing after removing ACL from a management interface in cluster.
sw0# show access-list ip
(snip)
Interface Management 11/0
Inbound access-list is MGMT_ACL_IN (From User)
Outbound access-list is not set

Interface Management 12/0
Inbound access-list is MGMT_ACL_IN (From User)
Outbound access-list is not set
(snip)
sw0# conf t
sw0(config)# interface Management 11/0
sw0(config-Management-11/0)# no ip access-group MGMT_ACL_IN
sw0(config-Management-11/0)# end
sw0# show access-list ip
sw0# <<<< Empty

 
Environment
  • VDX6740
  • NOS6.0.1
Cause
A cosmetic show command problem. If we remove ACL from one of the management interface in cluster in some scenarios, it is impacting the "show access-list ip" output on other nodes.
Resolution
Upgrade to a fixed software release
Additional notes
Network OS v7.2.0d Release Notes have this as NOS-67208

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255