Reset Search
 

 

Article

why do we see the debug related cli commands in log messages

« Go Back

Information

 
Titlewhy do we see the debug related cli commands in log messages
Symptoms
While collecting show tech the following messages would be seen in show log output.
09/14/2018 17:16:15.97 <Info:cli.logLocalCmd> Slot-1: serial unknown: debug hal show conduits 
09/14/2018 17:16:15.91 <Info:cli.logLocalCmd> Slot-1: serial unknown: debug hal show sys-health-check 
09/14/2018 17:16:15.84 <Info:cli.logLocalCmd> Slot-1: serial unknown: debug epm show process "cfgmgr" "ipml_msgqueue" 
09/14/2018 17:16:15.77 <Info:cli.logLocalCmd> Slot-1: serial unknown: debug hal show platform learning all 
09/14/2018 17:16:15.70 <Info:cli.logLocalCmd> Slot-1: serial unknown: debug hal run platform portmap 
09/14/2018 17:16:14.76 <Info:cli.logLocalCmd> Slot-1: serial unknown: debug hal show forwarding distributions slot 8 
09/14/2018 17:16:14.69 <Info:cli.logLocalCmd> Slot-1: serial unknown: debug hal show forwarding distributions slot 7 
09/14/2018 17:16:14.63 <Info:cli.logLocalCmd> Slot-1: serial unknown: debug hal show forwarding distributions slot 6 
09/14/2018 17:16:14.56 <Info:cli.logLocalCmd> Slot-1: serial unknown: debug hal show forwarding distributions slot 5 
09/14/2018 17:16:14.49 <Info:cli.logLocalCmd> Slot-1: serial unknown: debug hal show forwarding distributions slot 4 
09/14/2018 17:16:14.41 <Info:cli.logLocalCmd> Slot-1: serial unknown: debug hal show forwarding distributions slot 3 
09/14/2018 17:16:14.17 <Info:cli.logLocalCmd> Slot-1: serial unknown: debug hal show forwarding distributions slot 2 
09/14/2018 17:16:13.95 <Info:cli.logLocalCmd> Slot-1: serial unknown: debug hal show forwarding distributions slot 1 
09/14/2018 17:16:12.95 <Info:cli.logLocalCmd> Slot-1: serial unknown: debug vlan show globalData 
09/14/2018 17:16:12.31 <Info:cli.logLocalCmd> Slot-1: serial unknown: debug hal show stack-ports pre-emphasis 
09/14/2018 17:16:10.27 <Info:cli.logLocalCmd> Slot-1: serial unknown: show config 
09/14/2018 17:15:52.85 <Info:cli.logLocalCmd> Slot-1: serial unknown: run script spath-stats.py 
09/14/2018 17:15:45.02 <Info:cli.logLocalCmd> Slot-1: serial unknown: debug hal show sharing 
09/14/2018 17:15:44.09 <Info:cli.logLocalCmd> Slot-1: serial unknown: run script mem-stats.py

 
Environment
  • X460G2-24x-10G4
  • EXOS 16.2.3.5 version
Cause
  • This behavior is observed on the device when cli-config-logging is enabled and while collecting the "show tech" output.
  • During the execution of "show tech"  a script  spath-stats.py would run on the background. This script would execute a set of commands which are displayed in the logs since cli-config-logging is enabled. 
Resolution
This issue has been tested and fixed in EXOS 21.1.5.2 and above EXOS versions.
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255